Nitro and Condor multi-tasking self propelleled machines with 2 to 4 meters wheel spacing, booms out to 120" and tanks up to 6100 lt.

Ph (02) 6882 0313                                                                                   Fax (02) 6882 0373

NITRO & CONDOR SELF PROPELLED

                                                             

 



 
 





ENGINE • CUMMINS - 6BTA 5.9 liter w/ mechanical fuel injection, waist gate turbo and water to air after cooler • 200 hp @ 2500 rpm • 160 amp alternator • Two - 65 series batteries FUEL TANK • 120 Gallon • Located on left side COOLING • Large section radiator, oil cooler and condenser - stacked design with swing out cores for easy cleaning • Belt driven fan • Reversing Fan Optional ENGINE & TRANSMISSION LOCATION • Lower right side - ISO-mounted to right side walking beam HYDROSTATIC TRANSMISSION • Torq-trac heavy duty hydrostatic pumps • Twin (2) 75 cc SUNDSTRAND- 3200T, 3200T-SS & 3200T-ET • Twin (2) 100 cc SUNDSTRAND- 3200HT • Spin on oil filters WHEEL DRIVE MOTORS • 4 wheel drive • POCLAIN model MS-13 • 3200T, 3200T-SS • POCLAIN model MS-13 Dyna + • 3200T-ET • POCLAIN model MS-18 Dyna + • 3200HT • 3 speed - shift on the go (low range only on ET model) BRAKES • Parking -- 2 wheel std. on 3200T, 3200T-SS -- 4 wheel opt. on 3200T -- 4 wheel std. on 3200HT/3200T-ET • Spring applied, hydraulic released • Service -hydrostatic- 3200T/ 3200T-SS • Service - hydrostatic & foot actuated dynamic, 4 wheel brakes on 3200HT & 3200T-ET models TRAVEL SPEEDS • Range 1... 0 - 14 mph (Only Range Available on ET Model) • Range 2... 0 - 19 mph • Range 3... 0 - 29 mph (cams/00) • Range 3... 0 - 26 mph (w/optional high torque cams/02) WHEEL TREAD WIDTH ADJUSTMENT • 108" to 156" • Opt. - 113" to 161" - 3200T & 3200HT • Hydraulic adjustment standard AXILLARY HYDRAULIC PUMP • Closed center pressure compensated, EATON pump with 2700 psi operating pressure • 31 gpm CAB - FRONT MOUNTED • JOHN DEERE 90 series cab • Air ride with leveling valve • Pressurized - heat & air conditioned • Long windshield wiper - 2 blade & washer • AM-FM-WX radio • Tilt and telescoping steering wheel • Deluxe air ride seat • Charcoal filtration CROP CLEARANCE • 72" - 3200T, 3200HT & 3200T-SS • 92" - 3200T-ET SUSPENSION • AIR FLEX hydraulic cylinders (2) with accumulators and leveling valves • Left & right side walking beam suspension with travel in excess of 26" +/- STEERING • Hydrostatic power steering with two steering cylinders and no tie rods to adjust • NITROSTEEL hydraulic cylinder shafts • 13' - 15' turning radius - 3200T, 3200HT & 3200T-SS • 19' turning radius - 3200T-ET PRODUCT TANK • 3200T-SS - 1000 gal. poly • 3200T-ET - 750 gal. poly • 3200T, 3200HT - 750 or 1000 gal. poly, 1000 or 1200 gal. stainless, 1000 or 1200 gal. stainless integrated with 65 gal. foam tank & 110 gal. flush tank • 3 gallon hand wash - all models PRODUCT PUMP • Std. - all models, 9306C - HM5C HYPRO pump 210 gpm @ 80 psi • Opt. - 3200T & 3200HT 9305C-HM3C-SP HYPRO pump 146 gpm @ 80 psi 9307C-GM10 HYPRO pump 310 gpm @ 80 psi RATE CONTROLLER • RAVEN 460 with serial port and GPS compatible • RFM 60 flow meter (RFM 100 w/high flow pumps) • Hydraulic flow control to control pump volume • Optional speed sensors - wheel drive, radar and/or GPS antenna BOOM • Front mount with nitrogen accumulator suspension • Boom travel up/down - 27" to 107" • Individual wing tilt • NITROSTEEL cylinder shafts • 1" stainless steel boom lines with single non drip nozzle bodies (multiple head bodies optional) • Nozzle body spacing available on 10", 15", 20" or 25cm • Boom sizes available - 60', 60/75', 60/80', 60/90', 100' or 120'. 18m/27m, 18m/30m, 18m/32m or 22m/36m. (boom availability varies depending on model) • Optional quick detach kit FOAM MARKER - STANDARD • RICHWAY 40 gallon with boom end mixing chamber • Engine driven "on board air" supply TIRE SIZE OPTIONS • 380/R46 142 A8/B field lug Titan • 380/R46 142 A8/B highway lug Titan • 380/90R46 155 A8/155B field lug Michelin • 320/90R46 148 A8/B Titan • 320/90R50 156 A8/B Titan • 320/90R54 154 A8/B Titan • 520/85R38 158 A8/B Titan • 650/65R38 157 A8/B Michelin • Size availability varies depending on model DIMENSIONS • Overall width narrow 138" (11' 6") • Overall width wide 186" (15' 6") • Overall length with boom unfolded 280" (23' 4") • Overall height - 3200T & 3200T-SS... 154" (12' 11") 3200T-ET... 180" (13' 4") • Crop clearance - 3200T, HT & 3200T-SS... 72" (6') 3200T-ET... 92" (7' 10") • Shipping weight - 3200T/90'/1200 gal SS... 23,200 lbs 3200HT/90'/1200 gal SS... 24,090 lbs Shipping weights vary greatly depending on model of sprayer boom size and accessories LIGHTING Standard halogen lighting • 2 front high/low beam • 6 front work lights, cab roof • 2 front work lights, boom • 2 side work lights, 2 rear work lights Optional halogen lighting • 2 high intensity front • 2 side work lights, 2 rear work lights SERVICE • All hydraulic hoses and electrical wires are clearly marked for identification. NITRO 3275HT Specifications ENGINE • CUMMINS - Tier III - QSB 6.7 liter w/ electronic fuel injection, waist gate turbo & air to air after cooler • 275 hp @ 2500 rpm • 160 amp alternator • Two - 31H series batteries FUEL TANK • 120 gallon • Located on left side COOLING • Large section radiator, oil cooler and condenser - stacked design with swing-down cores for easy cleaning • 28" hydraulically driven fan • Reversing Fan Optional ENGINE AND TRANSMISSION LOCATION • Lower right side - ISO-mounted to right side walking beam HYDROSTATIC TRANSMISSION • Torq-trac heavy duty hydrostatic pumps • Twin (2) 100 CC SUNDSTRAND • Spin on oil filters WHEEL DRIVE MOTORS • 4 wheel drive • POCLAIN model MS-18 Dyna + • Optional high torque cam ring available (will reduce road speed) • 3 speed - shift on the go BRAKES • Parking - 4 wheel std. • Spring applied, hydraulic released • Service - hydrostatic & foot actuated dynamic, 4 wheel brakes TRAVEL SPEEDS • Range 1... 0 - 14 mph • Range 2... 0 - 19 mph • Range 3... 0 - 29 mph (cams/00) • Range 3... 0 - 26 mph (with optional high torque cams/02) WHEEL TREAD WIDTH ADJUSTMENT • 108" to 156" • Opt. - 113" to 161" • Hydraulic adjustment standard AUXILIARY HYDRAULIC PUMP • Closed center pressure compensated, EATON pump with 2700 psi operating pressure • 31 gpm CAB - FRONT MOUNTED • JOHN DEERE 90 series cab • Air ride with leveling valve • Pressurized - heat & air conditioned • Long windshield wiper - 2 blade & washer • AM-FM-WX radio • Tilt and telescoping steering wheel • Deluxe air ride seat • Charcoal filtration CROP CLEARANCE • 72" (6') SUSPENSION • AIR FLEX hydraulic cylinders (2) with accumulators and leveling valves • Left & right side walking beam suspension with travel in excess of 26" +/- STEERING • Hydrostatic power steering with two steering cylinders and no tie rods to adjust • NITROSTEEL hydraulic cylinder shafts • 13' - 15' turning radius PRODUCT TANK • 750 or 1000 gal. poly, 1000 , 1200 & 1400 Gal. stainless • 1000 gal. & 1200 gal. stainless integrated with 65 gal. foam tank and 110 gal. flush tank • 3 gallon hand wash PRODUCT PUMP • Std. - all models, 9306C - HM5C HYPRO pump 210 gpm @ 80 psi • Optional - 9305C-HM3C HYPRO pump 146 gpm @ 80 psi 9307C-GM10 HYPRO pump 310 gpm @ 80 psi RATE CONTROLLER • RAVEN 460 with serial port and GPS compatible • RFM 60 flow meter (RFM 100 w/high flow pump) • Hydraulic flow control to control pump volume • Optional speed sensors - wheel drive, radar and/or GPS antenna SERVICE • All hydraulic hoses and electrical wires are clearly marked for identification. BOOM • Front mount with nitrogen accumulator suspension • Boom travel up/down - 27" to 107" • Individual wing tilt • NITROSTEEL cylinder shafts • 1" stainless steel boom lines with single non drip nozzle bodies (multiple head bodies optional) • Nozzle body spacing available on 10", 15", 20" or 25cm • Boom sizes available - 60', 60/75', 60/80', 60/90', 100' and 120'. 18m/27m, 18m/30m, 18m/32m or 22m/36m (boom availability varies depending on model) • Optional quick detach kit FOAM MARKER - STANDARD • RICHWAY 40 gallon with boom end mixing chamber • Engine driven "on board air" supply TIRE SIZE OPTIONS • 380/R46 142 A8/B field lug Titan • 380/R46 142 A8/B highway lug Titan • 380/90R46 155 A8/155B field lug Michelin • 320/90R46 148 A8/B Titan • 320/90R50 156 A8/B Titan • 320/90R54 154 A8/B Titan • 520/85R38 158 A8/B Titan • 650/65R38 157 A8/B Michelin • Size availability varies depending on model DIMENSIONS • Overall width narrow... 142" (11' 10") • Overall width wide... 190" (15' 10") • Overall length with boom unfolded... 280" (23' 4") • Overall height... 154" (12' 11") • Crop clearance ... 72" (6') • Shipping weight - shipping weights vary greatly depending on boom size and accessories 3275/90'/1400 gal SS... 25,270 lbs 3275/120'/1400 gal SS... 26,550 lbs LIGHTING Standard halogen lighting • 2 front high/low beam • 6 front work lights, cab roof • 2 front work lights, boom • 2 side work lights, 2 rear work lights Optional halogen lighting • 2 high intensity front • 2 side work lights, 2 rear work lights